13
|
Operation
13.1.3 Information screen
Installer and user reference guide
52
INFORMATION
▪
Depending on configuration, the home screen displays the setpoint either as a
numerical value, or as a symbol. For more information, see
setpoint" [
4
▪
In case the home screen displays the setpoint as a symbol, then it will only display
the status icons of the standard home screen mode, even when the controller is
in detailed home screen mode.
INFORMATION
The controller is equipped with a power saving function that causes the screen to go
blank after a period of inactivity. To make the screen light up again, press any button.
The controller collects operation information in an information screen.
When there is information to convey, the controller displays
corner of the home screen.
a
a
On the information screen, you can find the following information:
For the meaning of the status icons, see
INFORMATION
▪
The presence of icons on the information screen depends on operation status.
The controller may display more or less icons than are indicated here.
▪
The information screen always displays the current software version, regardless
of operation status.
59].
Status icons
Software version
a
a Software version
"13.3.1 About the
in the top left
4
"12.3 Status
icons" [
47].
Madoka wired remote controller
4P596268-1A – 2022.02
BRC1H82W+K+S