Remote Controller: Overview; About The Controller - Daikin Madoka BRC1H82K Installer And User Manual

Wired remote controller
Hide thumbs Also See for Madoka BRC1H82K:
Table of Contents

Advertisement

4
|

Remote controller: Overview

4 Remote controller: Overview
In this chapter

4.1 About the controller

Installer and user reference guide
12
4.1
About the controller ...............................................................................................................................................................
4.2
Buttons....................................................................................................................................................................................
4.3
Status icons .............................................................................................................................................................................
4.4
Status indicator.......................................................................................................................................................................
Depending on configuration, the controller is operable in either one of three
modes. Each mode offers different controller functionality.
Mode
Normal
Alarm only
Supervisor
For more information on how to set the controller to be operable in a specific
mode, see
"12.1.1  To configure the
mode, it is important to set the supervised room address in order to know for
which indoor unit the refrigerant leak alarm occurs. See
4
address" [
 116] for more inormation.
Functionality
The controller is fully functional.
All functionality described under
4
"5 Operation" [
The controller can be a master or a
slave controller.
The controller only acts as leak
detection alarm for a single indoor unit.
No functionality described under
4
"5 Operation" [
For information on the leak detection
alarm, see
"7.2 Refrigerant leak
detection" [
The controller can be a master or a
slave controller.
The controller only acts as leak
detection alarm for the whole system,
i.e. multiple indoor units and their
respective controllers. This mode is
intended for a controller that is to be
used in a supervision location, e.g. the
reception desk of a hotel.
No functionality described under
4
"5 Operation" [
For information on the leak detection
alarm, see
"7.2 Refrigerant leak
detection" [
The controller can only be a slave
controller.
4
controller"  [
  46]. When using "Supervisor"
12
13
13
15
 16] is available.
 16] is available.
4
 33].
 16] is available.
4
 33].
"Supervised room
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Madoka brc1h82wMadoka brc1h82s

Table of Contents