14
|
Configuration
To remove an address
AirNet address
About AirNet address
To assign an AirNet address to an indoor unit
Installer and user reference guide
78
6 Before you confirm the address, make sure
7 Confirm the address.
Result: You assigned an address to the indoor unit.
1 Navigate to the address that you want to remove.
2 Change
to
.
3 Confirm your selection.
Result: The address gets removed.
To connect the system to the AirNet monitoring and diagnostics system, it is
required that you assign the indoor and outdoor units with the necessary
addresses.
Indoor units
Outdoor units
Prerequisite: You are in the installer menu.
1 Navigate to the address settings menu.
is selected.
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02