Daikin Madoka BRC1H82K Installer And User Manual page 88

14 | Configuration
To release Cooling/Heating masterhood
Refrigerant leak alarm test
About refrigerant leak alarm test
To test the refrigerant leak alarm
Information
About the information menu
Installer and user reference guide
88
Prerequisite: You are in the installer menu.
Prerequisite: You are operating the controller of the indoor unit that you want to
release from its masterhood.
1 Navigate to the Cooling/Heating masterhood menu.
2 Press to release the indoor unit from its masterhood.
Result: The indoor unit is released from its masterhood.
Result: The controllers of all indoor units display a blinking "changeover under
centralised control" icon.
It is possible to test the refrigerant leak alarm.
Prerequisite: You are in the installer menu.
1 Navigate to the refrigerant leak alarm test menu.
2 Press to enter the menu and thus activate the alarm.
Result: The controller starts buzzing and the status indicator starts flashing.
Result: The controller displays the following screen:
3 To stop the alarm again, press
Result: The alarm stops and the controller returns to the installer menu.
INFORMATION
The refrigerant leak alarm can also be tested using the Madoka Assistant app. See
"R32 refrigerant system
In the information menu, you can see the following information:
.
4
settings" [ 116] for more information.
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02