Daikin Madoka BRC1H82K Installer And User Manual page 112

15 | About the app
Active airflow circulation
Cooling/Heating masterhood
Airflow direction range
Installer and user reference guide
112
Enable Active airflow circulation to have a more even temperature distribution in
the room.
When Active airflow circulation is enabled, indoor unit fan speed and airflow
direction get controlled automatically, making manual fan speed and airflow
direction changes impossible.
Set an indoor unit (or group of indoor units) as Cooling/Heating master. When
multiple indoor units are connected to an outdoor unit, one of these units (or a
group of indoor units, in case of group control) needs to be set as Cooling/Heating
master. The other units/groups then become Cooling/Heating slaves, and are
restricted in their operation by the master (e.g. one outdoor unit does not allow for
one indoor unit to run in Cooling operation while another runs in Heating
operation).
When an indoor unit or group of indoor units is set as Cooling/Heating master, the
other units/groups automatically become its slaves. To turn a slave unit into the
master, first connect the app to the controller controlling the currently active
master and release it from its masterhood, then set the (slave) unit as master.
Set the indoor unit airflow direction range according to the installation location.
This function is available for floorstanding indoor units only. The maximum number
of indoor units for which you can make these settings is 16.
Left
The ranges correspond with the following airflow swing patterns:
Left
Left swing
INFORMATION
The availability of this function depends on the type of indoor unit.
INFORMATION
For systems in which the indoor units run in simultaneous operation, it is possible to
set the airflow direction range of individual indoor units by connecting the controller
to each indoor unit separately.
Centre
Centre
Wide swing
Right
Right
Right swing
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02