Oled Display Menu - peplink PEPWAVE Balance One User Manual

9

OLED Display Menu

> HA State: Master/Slave
> LAN IP
> VIP
> System Status
> System
> Firmware ver.
> Serial number
> System time
> System uptime
> CPU load
> LAN
> Link status
> WAN1
> WAN2
> WAN3*
> VPN status
> VPN Profile 1
> VPN Profile 2
> ...
> VPN Profile n
> Link usage
> Throughput in
> Throughput out
> Data Transfered
> WAN1
> WAN2
> WAN3*
> Maintenance
> Reboot > Reboot? (Yes/No)
> Factory default > Factory default? (Yes/No)
> LAN config
> Port speed
> LAN
> WAN1
> WAN2
> WAN3*
*Layout continues as such for all available WAN ports
https://www.peplink.com
> Status
> IP address
> Subnet mask
> WAN1
> WAN2
> WAN3*
> WAN1
> WAN2
> WAN3*
72
(shows firmware version)
(shows serial number)
(shows current time)
(shows system uptime since last reboot)
(shows current CPU loading, 0-100%)
(shows LAN port physical status)
(shows LAN IP address)
(shows LAN subnet mask)
(shows Connected/Disconnected, IP address list)
(shows Connected/Disconnected)
(shows transfer rate in Kbps)
(shows transfer rate in Kbps)
(shows volume transferred since last reboot in MB)
(to reboot the unit)
(to restore factory defaults)
(shows port speed: Auto, 10baseT-FD, 10baseT-HD,
100baseTx-FD, 100baseTx-HD, 1000baseTx-FD)
Copyright @ 2022 Peplink