Dhcp Connection - peplink PEPWAVE MAX BR2 Pro User Manual

9.1.1 DHCP Connection

There are four possible connection methods:
1. DHCP
2. Static IP
3. PPPoE
4. L2TP
The DHCP connection method is suitable if the ISP provides an IP address automatically
using DHCP (e.g., satellite modem, WiMAX modem, cable, Metro Ethernet, etc.).
Routing Mode
IP Address/ Subnet
Mask/ Default
Gateway
Hostname
(Optional)
DNS Servers
https://www.peplink.com
DHCP Connection Settings
NAT allows substituting the real address in a packet with a mapped
address that is routable on the destination network. By clicking the help
icon in this field, you can display the IP Forwarding option, if your
network requires it.
This information is obtained from the ISP automatically.
If your service provider's DHCP server requires you to supply a hostname
value upon acquiring an IP address, you may enter the value here. If your
service provider does not provide you with the value, you can safely
bypass this option.
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the DNS (Domain Name System) servers to be used when a
DNS lookup is routed through this connection.
Selecting Obtain DNS server address automatically results in the DNS
servers being assigned by the WAN DHCP server to be used for outbound
DNS lookups over the connection. (The DNS servers are obtained along
with the WAN IP address assigned from the DHCP server.)
When Use the following DNS server address(es) is selected, you may
39 Copyright @ 2019 Pepwave