Master/Slave Mode; Sound-Controlled Mode; Pan Reverse Mode; Tilt Reverse Mode - SHOWTEC Beacon 360 Manual

Beacon 360

5. Master/Slave Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to toggle between the following slave modes:
04) Press the SETUP button to confirm your choice.

6. Sound-controlled Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to toggle between the following options:
04) Press the SETUP button to confirm your choice.
05) When the display shows
06) Press the UP and DOWN buttons to set the sound sensitivity between
0 = Off, 255 = very sensitive.
07) Press the SETUP button to store changes.

7. Pan Reverse Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to choose between 2 options:
04) Press the SETUP button to store changes.

8. Tilt Reverse Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to choose between 2 options:
04) Press the SETUP button to store changes.

9. Display settings

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to toggle between the following options:
04) Press the SETUP button to confirm your choice.
Ordercode: 45051
Normal slave mode
Mirror slave mode
Sound-controlled mode ON
Sound-controlled mode OFF
Sound Sensitivity settings
, press the SETUP button to enter the sound sensitivity menu.
Display always ON
Display OFF after 10 seconds
Display brightness
16
.
.
.
.
.
.
.
.