Manual Control Mode - SHOWTEC Beacon 360 Manual

Beacon 360

4. Manual Control Mode

In this menu it is possible to manually adjust the device's settings.
01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to toggle between the following settings:
04) When the display shows
Subsequently, press the UP and DOWN buttons to adjust the pan movement settings between
05) Press the SETUP button to store the changes.
06) When the display shows
Subsequently, press the UP and DOWN buttons to adjust the tilt movement settings between
07) Press the SETUP button to store changes.
08) When the display shows
09) Press the UP and DOWN buttons to set the red color intensity between
0 = off, 255 = full on.
10) Press the SETUP button to store changes.
11) When the display shows
12) Press the UP and DOWN buttons to set the green color intensity between
0 = off, 255 = full on.
13) Press the SETUP button to store changes.
14) When the display shows
15) Press the UP and DOWN buttons to set the blue color intensity between
0 = off, 255 = full on.
16) Press the SETUP button to store changes.
17) When the display shows
18) Press the UP and DOWN buttons to set the white color intensity between
0 = off, 255 = full on.
19) Press the SETUP button to store changes.
Ordercode: 45051
Pan
Tilt
Red Color
Green Color
Blue Color
White Color
, press the SETUP button to enter the menu.
. The values correspond with their DMX counterparts.
, press the SETUP button to enter the menu.
. The values correspond with their DMX counterparts.
, press the SETUP button to enter the menu.
, press the SETUP button to enter the menu.
, press the SETUP button to enter the menu.
, press the SETUP button to enter the menu.
15
.
.
.
.
.