Software Version; Restoration Of Factory Settings; Setting Reset; Auto Test Mode - SHOWTEC Beacon 360 Manual

Beacon 360
05) When the display shows
06) Press the UP and DOWN buttons to set the display brightness between
01 = dark, 10 = very bright.
07) Press the SETUP button to store changes.

10. Software version

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to look up the currently installed software version.

11. Restoration of Factory Settings

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to choose between 2 options:
04) If the display shows

12. Setting Reset

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to choose between 2 options:
04) If the display shows

13. Auto Test Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the SETUP button to run the automatic test of all the available features.
Ordercode: 45051
, press the SETUP button to enter the display brightness menu.
, press the SETUP button to start restoring the factory settings.
, press the SETUP button to start resetting settings.
17
.
.
.
.
.
.
.