Rosemount 702
Troubleshooting
If the device is not operating properly, refer to the troubleshooting section of the manual. The
most common cause of incorrect operation is the Network ID and Join Key. The Network ID
and Join Key in the device must match that of the 1420 Wireless Gateway.
The Network ID and Join Key may be obtained from the 1420 Wireless Gateway on the
Setup>Network>Settings page on the web server (see Figure 2: 1420 Network Settings on
page 7). The Network ID and Join Key may be changed in the wireless device by using the
following Fast Key sequence.
Function
Network
8
Key Sequence
1, 4
Quick Installation Guide
00825-0100-4702, Rev BA
Menu Items
Smart Power, Network ID, Set Join
Key, Radio State
August 2009