Table of Contents
Advertisement
1 1 . A n t i C o d e / E n g i n e e r R e s t o r e F a c i l i t y
11.1 Anti-Code
Your Engineer may have set up the system so that either an 'Anti-Code' or 'Engineer Restore' is
required in order to fully reset the wireless alarm system (your code will still silence the alarm,
but it will not reset the system).
After alarm activation has occurred,
enter a valid PIN code, or present a valid
tag, or press
the alarm.
The keypad will display as shown to the
right.
Take note of the number, on the screen
and call your Alarm Receiving Centre
(ARC).
Press A.
When the time is displayed, enter the
number given to you by the ARC.
'Engineer Restore Performed' will be
displayed.
Press A .
11.2 Engineer Reset
When the time is displayed, enter the
Engineer code.
'Engineer Reset Performed' will be
displayed.
Press A.
Wireless Alarm System: User Manual
on the keyfob to silence
Alarm Silenced
Restore G12298
Engineer Reset
Performed
Restore
Required
12
Advertisement
Table of Contents
Need help?
Do you have a question about the RINS1902-2 and is the answer not in the manual?
Questions and answers