Walk Test; Bell Test; Enter Engineer Menu; Exit Manager Mode - Pyronix PCX-12 User Manual

4.5 Walk Test

The Walk Test enables you to check that all the detectors are working properly. Follow the procedure below:
WALK TEST?
Walk Test Parts
Walk Test Zones
Zone 01
Walk Test
Completed

4.6 Bell Test

Follow the procedure below to test any external sounders connected to the system.
BELL TEST?
Testing Bell . . .

4.7 Enter Engineer Menu

This selection is reserved for your service engineer, and cannot be accessed without the Engineer Code.

4.8 Exit Manager Mode

Select this option to save any changes you have made, and return to normal, disarmed mode.
12
A
B
C
D
A
B
[ABCD]
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
Press .
Enter the partitions that you wish to test, using the A, B,
C and D keys. Once you have chosen them, press
The Walk Test will commence.
The zones to be tested will scroll on the bottom line of
the display. Walk around the building, ensuring that you
pass each detector to be tested. As each detector is
activated, a chime will be played, and that zone will be
removed from the scrolling list.
When all the detectors have been activated, the display
shows "Walk Test Completed". Press
the test, and then
Menu..
Press .
The bell will sound, and the strobe will flash. When the
test is completed, press
Manager Menu.
PCX User Manual
to complete
to return to the main Manager
to return to the main
RINS459-2
.