Table of Contents
Advertisement
14.4 Operate User Outputs
Press b or A to scroll to 'OPERATE
USER OUTPUTS'. Press I.
Select the output to be operated by
using the [ or ] keys and press I.
Press I trigger output on and off.
Press A to exit.
14.5 Omit Inputs
Press b or A to scroll to 'OMIT
INPUTS'. Press
Enter the inputs you require to be
omitted for the next setting procedure.
Press I.
NOTE: All inputs will be only omitted for
the next setting procedure.
14.6 Edit Users (Adding/deleting codes, tags and keyfobs)
The 'EDIT USERS' function allows adding, editing and deleting of user codes, tags and keyfobs.
The master manager code can also be changed.
The control panel can have up to 80 user codes or tags. Up to 32 keyfobs can be learnt.
14.6.1 Button Actions:
Each wireless keyfob has 4 buttons that can be programmed for any of the functions below:
No Action = Disables the button
Show Status = If the keyfob is learnt the LED will flicker when asked for the status.
Set Area = Sets the chosen area
Unset Area = Unsets the chosen area/s
Operate Output = Triggers an output on the panel (programmed by Engineer)
Flexi-set allows you to choose which level/area to set if a user code or tag is assigned to
one or more levels/areas. If this function is disabled, when a user code is entered or prox
tag presented, the system will automatically set the levels/areas that the user is assigned
to.
PLEASE NOTE: Any proximity tags that are to be used on a standalone tag reader
must have flexi-set set to 'No'
Press b or A to scroll to 'EDIT
USERS?'. Press I.
To add a new code, tag, or keyfob press
I. Press A to delete or change a user
code (see further down for details).
Wireless Alarm System: User Manual
I
.
OPERATE USER
OUTPUTS?
Select Output
Output Off
OMIT INPUTS?
Omit Day Al [--]
EDIT USERS?
Add New User?
17
[01]
Advertisement
Table of Contents
