13.7 Walk Test
The 'Walk Test' function allows the testing of all programmed inputs on the alarm system.
Ø Use the
B
'Walk Test'. Press the
Ø Select which level set to walk test.
Press the
YES
inputs or press the
an input individually.
Walk testing all inputs
Ø Walk test the mentioned inputs on the
display. After all inputs have been
walk test successfully 'walk test
completed' will be displayed.
Walk testing individual inputs
Ø Use the
B
through the different inputs and press
the
key to walk test that input
YES
13.8 Siren Test
This function is used to test the siren and strobe outputs
Ø Use the
B
'Siren Test'. Press the
Ø This tests both the siren and strobe
outputs. Press the
and
keys to scroll to
NO
key
YES
key to walk test all
NO
key to walk test
and
D
keys to scroll
and
NO
keys to scroll to
key
YES
YES
key
Page: 21