Unsetting The System; Using A Pin Code Or Tag; Using A Wireless Keyfob (Kf4-We) - Pyronix RINS1902-2 User Manual

8 . U n s e t t i n g T h e S y s t e m

8.1 Using a PIN Code or Tag

Enter the building, the 'entry time' will
start.
Enter a valid PIN code or present a valid
tag to the symbol as shown.
The area that the code is assigned to will
be unset.
NOTE: If 'flexi-set' is disabled (see page
17) then the system will automatically
Unset that level set once a valid user
code or tag is presented.

8.2 Using a Wireless Keyfob (KF4-WE)

To unset via a keyfob. Press
The keyfob LED will start to flash GREEN
indicating that the system has unset.
NOTE: Unsetting with a keyfob will only be
allowed if your engineer has enabled this.
Wireless Alarm System: User Manual
.
9
ENTRY TIME [030]
Enter Your Code
[******]
Alarm Panel
Time 10:09 c