Develop ineo 5020i User Manual page 47

Error Message
Paper Low
Paper Low T1
Paper Low T2
Paper Low T3
Print Data Full
Print Unable ##
Received Fax ##
Replace Toner
Scan Unable
Scan Unable ##
Self-Diagnostic
Cause
The paper tray is nearly
empty.
The machine's memory is
full.
The machine has a
mechanical problem.
An unprinted received fax
is waiting to print on the
correct size paper.
The toner cartridge is at
the end of its life. The
machine stops all print
operations.
While memory is
available, faxes are
stored in the memory.
The document is too long
for 2‑sided scanning.
The machine has a
mechanical problem.
The temperature of the
fuser unit does not rise to
a specified temperature
within the specified time.
The fuser unit is too hot.
Action
Refill the paper in the paper tray
indicated on the LCD.
Press and delete the previously
stored secure print data.
• Press and hold
machine off, wait a few minutes, and
then turn it on again.
• If the problem continues, contact
customer support.
To print the received fax, load the
correct size of paper in the tray indicated
on the LCD. Paper sizes available for
fax printing are A4, Letter, Legal and
Folio.
Replace the toner cartridge with a new
one.
Press . For 2-sided scanning, use
A4 size paper. Other paper must be
within the following size:
Length: 147.3 to 355.6 mm
Width: 105 to 215.9 mm
• Press and hold
machine off, and then turn it on
again.
• If the problem continues, contact
customer support.
Press and hold to turn the machine
off, wait a few seconds, and then turn it
on again. Leave the machine idle for 15
minutes with the power on.
to turn the
to turn the
41