Table of Contents
Advertisement
5
Click Yes.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
7
Click OK when finished.
Note: To turn the hot spare back to a normal drive, choose Set as a normal drive.
RMM (RAID Mode Manager)
With RMM, you can create or expand a RAID array without erasing the data on the drives.
Changing from JBOD to RAID 1
You must have at least two drives available in JBOD (not in a RAID array) to build the RAID 1 array with RMM.
1
From Settings, click Storage.
2
Click
to the right of "RAID".
3
Choose a RAID array.
54
Advertisement
Table of Contents
