Two Psu Devices Are Installed - Buffalo TeraStation TS5210DN User Manual

8
Configure the desired settings, then click OK.

Two PSU Devices Are Installed

If you add multiple PSU devices to your TS51210RH series, the following connection setups are available.
A. To Boot the TeraStation After the Power Supply Recovers (Recommended)
Connect both power cables of the TeraStation to a single UPS device.
Wall Socket
B. To Increase Redundancy for Power Failure
Connect one power cable of the TeraStation to the UPS device and the other to the wall socket. Use separate power
supply systems to increase redundancy.
Wall Socket 1
Wall Socket 2
UPS
UPS
154
TS51210RH
TS51210RH