Table of Contents
Advertisement
1
Insert the USB drive with the saved settings to a USB port on the TeraStation.
2
From Settings, click Management.
3
Click
to the right of "Configuration Management".
4
Select "Transfer settings from a USB drive".
5
From "Target USB Drive", select the USB drive that is connected to the USB port on the TeraStation, then click
Execute.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
7
The TeraStation will apply the settings. When applying settings is finished, click OK.
Transferring Another TeraStation's Settings
You can transfer saved settings from another series TeraStation to your TeraStation. The following settings can be
transferred:
• Shared folders which are created from "File Sharing" > "Folder Setup"
• Access restrictions
• Users
• Groups
Note: This feature currently supports the following TeraStation series as of August 2016. The latest compatibility
information will be on the Buffalo website.
• TS-X series firmware version 1.58 or later
• TS3000 series
• TS4000 series
• TS5000 series
• TS3010 series
• TS5010 series
169
Advertisement
Table of Contents
