Chapter 5 Backup
Backing Up to a Buffalo NAS Device
You can back up the TeraStation folders to another shared folder on the same TeraStation, a connected USB drive, or
a shared folder on another Buffalo NAS device, either on the same network or on another network. For best results,
using a 10GbE port to connect a backup device is recommended.
Preparing a Backup Destination
First, configure a shared folder on a Buffalo NAS device or connected USB device as a backup destination. The
following procedure explains using another shared folder on a TeraStation as a backup destination. The procedure
may vary depending on which Buffalo NAS device is selected as a destination.
1
From Settings, click File Sharing.
2
Click
to the right of "Folder Setup".
3
Choose the folder to set as a backup destination.
4
Under "LAN Protocol Support", select the "Backup" checkbox on the Basic tab.
5
Click OK.
80