Table of Contents
Advertisement
Name, Date, Time, and Language
Configure the TeraStation's hostname, date, time, and language as shown below.
Note: If the TeraStation is being used as an iSCSI drive, to change the settings, navigate to Storage > iSCSI in Settings
and move the iSCSI switch to the off position temporarily before changing settings.
1
From Settings, click Management.
2
Click
to the right of "Name/Time/Language".
3
Click Edit.
4
Click the Name tab, then configure the TeraStation's name and description.
The name will be used for identifying your TeraStation on the network. When your TeraStation is detected,
the name will be used as the hostname. The hostname may contain up to 15 alphanumeric characters and
hyphens (-). The first and last characters should not be a hyphen.
182
Advertisement
Table of Contents
