Buffalo TeraStation TS5210DN User Manual page 202

5
Insert the new drive into the empty slot. Slide the drive in with the locking mechanism open.
6
Swing the lock back down until it clicks into place.
7
Close the front cover.
8
When the replaced drive is recognized, the status LED will flash red and the I31 message will appear on the
LCD panel.
9
Press the function button on the front of the TeraStation. The TeraStation will beep. If replacing multiple
malfunctioning drives at once, select the replaced drives on Settings and click Recover RAID Array.
10
For a redundant RAID mode:
201