4-Bay Rackmount Model - Buffalo TeraStation TS5210DN User Manual

4-Bay Rackmount Model

TS5410RN
11
12
1
Power Button (
To power on, connect the power cable and wait for 10 seconds, then press the power button. To power off,
press and hold the power button for 3 seconds.
If the TeraStation beeps, pressing this button for a short period will stop the beeping.
2
Info LED
If there is a status message, the amber info LED will light up. Check the LCD panel to see the status message.
3
Error LED
If there is an error, the red error LED will light up. Check the LCD panel to see the error message.
4
LAN1 LED
When LAN port 1 is connected, this LED glows green. It blinks when the connection is active.
5
LAN2 LED
When LAN port 2 is connected, this LED glows green. It blinks when the connection is active.
6
LAN3 LED
When LAN port 3 is connected, this LED glows blue. It blinks when the connection is active.
7
LCD Panel
This display shows the status of many TeraStation settings. It also displays errors and messages when available.
8
Display Button
Switches between the different display modes. Also, if the TeraStation is beeping, press this button to stop it.
9
Function Button
Use this button for dismounting USB devices, rebuilding RAID arrays, configuring failover, stopping the
TeraStation's beeping, and initializing settings using a USB drive.
19 11 20 2 3 4 5
21
20 13 14 15 16
)
6 11 1 7 8
22 23
24
18
12
9 11 10 13
17 12