Table of Contents
Advertisement
Chapter 2 Configuration
Configure and manage your TeraStation using the Settings interface, accessible from a browser window. Open the
interface using the procedure below or type the TeraStation's IP address into the URL field of your browser.
Notes:
• Microsoft Edge, Firefox, Google Chrome, Internet Explorer 9 or later, and Safari 9 or later are supported. If you
have difficulty viewing Settings, check the following:
◦ If there are a large number of registered users, groups, or shared folders, use another browser instead of
Internet Explorer.
◦ If you have a proxy server enabled in the browser settings, configure the exception settings for Settings or
disable the proxy server.
◦ With Internet Explorer, set security to Local intranet. On Windows Server operating systems, higher-level
security is configured by default. Set the security to a lower level temporarily.
• From a Mac, you can also use Bonjour to log in to Settings. Navigate to Bookmarks > Bonjour > TeraStation name
from the menu bar of Safari. If you don't see "Bonjour" in the Bookmarks menu, click Safari > Preferences and
select "Include Bonjour in the Bookmarks menu" under "Advanced".
Running the Setup Wizard
Setting Up Through Setup Wizard
When you access Settings for the first time, or after initializing the TeraStation's settings, the setup wizard will
automatically be displayed. To set up the TeraStation using the wizard, follow the procedure below.
1
Double-click the NAS Navigator2 icon (
2
Right-click your TeraStation's icon and select Settings. For macOS, select the TeraStation's icon while holding
down the control key, then select Settings.
) to start NAS Navigator2.
19
Advertisement
Table of Contents
