Table of Contents
Advertisement
2
Click
to the right of "Power Management".
3
Click the Power Supply Failure tab.
4
Click Edit.
5
Select the number of minutes that will elapse after the power supply fails before the unit shuts down and click
OK.
Port Trunking
Two Ethernet cables can be used to establish two separate communication routes, providing LAN port redundancy
and improving communication reliability. The use of two Ethernet cables enables access to the TeraStation even if
one of the cables is disconnected.
The port trunking modes that can be set in the TeraStation are shown below.
157
Advertisement
Table of Contents
