Table of Contents
Advertisement
If authentication fails, the TeraStation will stay on, but all functions and services are stopped. Users will not be able
to log in to Settings to make changes or access any shares.
Notes Before Use
• To use boot authentication, a Windows PC is necessary to serve as the authentication server.
• When activating boot authentication, the drives on the TeraStation will be formatted and all data on the drives
will be erased. Back up any important data to another device. Even though the data is deleted, the RAID array
will be kept as is.
• Assigning the TeraStation a fixed IP address is recommended for boot authentication.
• When boot authentication settings finish, export the configuration file for backup. Refer to the "Exporting
Managed TeraStations to a File" section in the Boot Authentication Tool help for the procedure.
• Boot authentication cannot be enabled if any of the following functions are enabled: drive encryption, LVM,
iSCSI, and failover. Conversely, these functions cannot be enabled while boot authentication is enabled.
Important Notice
This feature was developed with the intention of preventing critical data leakage by rendering the TeraStation
unusable in cases of misoperation or missing important setting files. Before configuring boot authentication, back
up the data on the TeraStation by referring to the "Backup" section in chapter 5 and create a settings initialization
drive by referring to the "Creating an Initialization Drive" subsection above. With these preparations, a TeraStation
that is unusable may be initialized and reverted to a usable state.
If any of the situations below occur, the TeraStation will stop booting and become inaccessible.
• The TeraStation is unable to communicate with the authentication server due to the server crashing or it being
on another network.
• The TeraStation unit has been deleted from Boot Authentication Tool or the Boot Authentication Tool database
has been erased.
• Security level is configured to "High" and the wrong passcode is entered 3 times.
Setting Up the Authentication Server on a Windows PC
To set up the authentication server, follow the procedure below. The authentication server must be placed on the
local network or VPN.
Note: For proper operation, make sure that the TeraStation and the authentication server are on a network with only
one router. If there are two or more routers on the network, the authentication server may not acquire the correct
TeraStation status. For example, if the TeraStation's IP address has been changed, its status does not change to
"Warning".
190
Advertisement
Table of Contents
