Table of Contents
Advertisement
*If the backup TeraStation took over the main TeraStation's IP address after failover, the WebAccess settings will not
be copied. Re-register your BuffaloNAS.com account for WebAccess. If the backup TeraStation kept its IP address, the
settings will be copied from the main TeraStation.
**The settings configured on the Trend Micro NAS Security settings page will not be copied to the backup
TeraStation. The settings configured on the main TeraStation's Settings page will be copied. Only if the antivirus is
activated on the TeraStation.
Using with UPS
Once failover is configured, you cannot set up a UPS for the backup TeraStation. Configure your UPS before
configuring failover. UPS recovery can be configured for both the main and backup TeraStations.
Configuring Failover
1
From Settings for the main TeraStation, click Backup.
2
Click
to the right of "Failover".
3
Click Configure Failover.
100
Advertisement
Table of Contents
