Table of Contents
Advertisement
12-Bay Rackmount Model
TS51210RH
4
5
6
7
1
Power Button (
To power on, connect the power cable and wait for 10 seconds, then press the power button. To power off,
press and hold the power button for 3 seconds.
If the TeraStation beeps, pressing this button for a short period will stop the beeping.
2
Power LED (
)
When the TeraStation is on, the LED glows green.
3
Error LED (
)
If there is an error, the red error LED will light up. Check the Settings interface or NAS Navigator2 to see the
error message.
4
Reset Button
Press and hold this button with something pointed to initialize the TeraStation's admin username and
password, IP settings, SSL, and service port restriction settings to their factory default values. The effects of this
button can be changed in Settings.
5
Function Button
Use this button for rebuilding RAID arrays, configuring failover, stopping the TeraStation's beeping, and
initializing settings using a USB drive.
1
2
3
11
12
13
14 15 16 17 18
)
19
14
8
9
20
21
22
10
Advertisement
Table of Contents
