Table of Contents
Advertisement
Chapter 3
Configuration
Configuration is done from the TeraStation's web-based configuration utility.
1
Click "Start" - "All Programs" - "BUFFALO" - "iSCSI Hard Disk Connection Tool" - "iSCSI Hard Disk Connection
Tool". The iSCSI Hard Disk Connection Tool will launch.
2
3
4
The TeraStation's web-based configuration utility opens.
TeraStation IS Setup Guide
If 2 or more TeraStations are connected, select the one to configure.
Write down the TeraStation's IP Address. Click "Browse Web setting"
from the "Setup" menu.
1 Enter the username and password.
By default, the username is "admin" and the password is
"password".
2 Click "Login".
Notes: • The configuration utility supports Firefox 1.5 or later,
Internet Explorer 6 SP 2 or later, and Safari 3 or later.
• If proxy is enabled on your browser, the configuration
screen will not be displayed correctly. Disable proxy if it is
enabled.
• Security settings may prevent the configuration utility
from displaying normally. In Internet Explorer, select
"Tools" - "Internet Options" - "Security" and set security to
"Local Intranet".
• To open the configuration utility from a browser
window, type the TeraStation's IP address into the URL
field of the browser, then press the "Enter" key. Enter
the username and password as above.
13
Hide quick links:
Advertisement
Table of Contents
