Notes; Compliance Information; Fcc Warning; Ce Mark Warning - Buffalo TeraStation WSS 5000 User Manual

After the recover process is completed, the TeraStation is set to the state below when used at the default
settings.
• Drive 1
100 MB (EFI System partition)
100 GB (Basic Disk/Simple)
The remaining space is an unallocated area.
• Drives 2 to 4
The data on the drives cannot be viewed. They appear as a "Foreign" in "Disk Management".
Note: The data on the drives can be viewed by right-clicking the area displayed as "Foreign" in "Disk Management"
and then selecting Import Foreign Disks.
(1) Mirror the system area by using RAID Builder (drive 1 to drive 2).
(2) Remove the area for RAID 5 in drive 3 and 4.
(3) Create a RAID 5 volume with drives 1-4 using RAID Builder.

Notes

Using an Omron UPS
The TeraStation's LCD panel will not display information correctly when an Omron UPS is first connected. This is be-
cause the LCD panel control and the Omron UPS both use COM port 2. To resolve, refer to the Omron's user manual and
change its UPS communication port to a port other than COM 2, then restart the TeraStation.
Ethernet port number is not correct on the Windows Storage Server or LCD display.
Ethernet port numbers are assigned in the order of recognizing them. They might be different from printed port
numbers.

Compliance Information

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

CE Mark Warning

CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user
may be required to take adequate measures.
65