Chapter 6 - Performing System Operations; Viewing System Information - Certance CP3100 D2D2T User Manual

6 Performing System Operations
This chapter describes how to use RemoteAdmin to perform system operations.
Topics in this chapter are:
"Viewing System Information" on page 74
•
"Updating the CP 3100 Firmware" on page 76
•
"Viewing Device Inventories" on page 77
•
"Viewing the System Log" on page 80
•
"Viewing Messages" on page 81
•
"Restarting or Shutting Down the CP 3100" on page 82
•

Viewing System Information

The System Tools page consists of read-only pages that display status, generic system, and firmware
information. To display this page, click SYSTEM TOOLS. Figure 37 on page 75 shows an example
of the System Info page. Table 14 on page 75 describes the information shown in the System Info
page.
74