Figure 29. Example Of A Physical Tape Drive Attached To The Cp 3100; Viewing Device Properties - Certance CP3100 D2D2T User Manual

Basic and Advanced Operations
NOTE: To update the information on this page automatically, set the Auto Refresh setting at
the top of the page (you can also manually update the information by clicking the Refresh button
in your browser). Placing the pointer over the name of a tape cartridge in the PHYSICAL
DRIVE, VIRTUAL DRIVE, or VIRTUAL LOADER section displays detailed status information
in a pop-up window (see "Displaying Pop-up Information" on page 65).

Viewing Device Properties

The first entry on the Device Status page identifies the physical tape drive attached to the CP 3100
(see Figure 29 on page 59).

Figure 29. Example of a Physical Tape Drive attached to the CP 3100

This section provides the
this icon displays a page similar to the one in Figure 30 on page 60. Use this page to change
selected properties for all virtual tape cartridges in the CP 3100 (see Table 7 on page 60). Any
change entered on this page affects all virtual tape cartridges. To configure an individual virtual tape
cartridge, see "Configuring a Virtual Tape Cartridge" on page 64.
icon in the right column for viewing the tape drive properties. Clicking
Performing Basic Operations
59