Initial Setup
Table 3. Date/Time Settings Page
Value
Date
Time
Specifying a Password
RemoteAdmin comes configured with no password. For security purposes, enter a password to
guard against unauthorized access. After entering the password, record it in Chapter 10.
CAUTION: After you record the password, store it in a safe place for future reference. You will
not be able to access the CP 3100 if you lose the password.
1.
Click CONFIGURATION, then click CHANGE PASSWORD. The Password Settings page
appears (see Figure 23 on page 47).
Figure 23. Password Settings Page
Description
Enter the current date, in mm/dd/yyyy format. Example: 05/09/2004 is equiva-
lent to May 9, 2004.
Enter the current time, in 24-hour format using the syntax hh:mm:ss. You do not
need to specify AM or PM. Example: 14:18:56 is equivalent to 2:18:56 PM.
Setting the Initial Configuration
47