Typical System Configurations; Table 20. Tape Alert Flags - Certance LTO 1 User Manual

Interfaces
Tape Alert Flags
The LTO-1 and LTO-2 drives support version 3.0 of the Tape Alert specification. The following flags
are supported by the drive.

Table 20. Tape Alert Flags

Parameter
3
4
5
6
9
11
14
15
16
17
18
20
21
22
23
30
31
32
34

Typical System Configurations

Parallel SCSI Interface
The LTO-1 and LTO-2 drives support up to 16 SCSI addresses or IDs. These IDs refer to host adapters
or peripheral devices such as printers, magnetic discs or tape drives.
Any combination of a single host and up to 15 additional SCSI devices can be chained together on
a single SCSI cable.
Due to the speed of the LTO-1 and LTO-2 drives, it is recommended that a maximum of one LTO-1 or
LTO-2 drive be connected to one host SCSI adapter.
Description
Hard Error
Media
Read Failure
Write Failure
Write Protect
Cleaning Media
Irrecoverable Snapped Tape
Memory in Cartridge Failure
Forced Eject
Read Only Format
Tape Directory Corrupted
Clean Now
Clean Periodic
Expired Cleaning Media
Invalid Cleaning Cartridge
Hardware A
Hardware B
Interface
Download Fault
Typical System Configurations
Type
Warning
Critical
Critical
Critical
Critical
Information
Critical
Warning
Critical
Warning
Warning
Critical
Warning
Critical
Critical
Critical
Critical
Warning
Warning
68