Performing System Operations
Restarting or Shutting Down the CP 3100
The Shutdown page is the preferred way to restart or shut down the CP 3100.
1.
Click SYSTEM TOOLS, then click SHUTDOWN. The Restart Shutdown page appears (see
Figure 43 on page 82).
Perform one of the following steps:
2.
To restart the CP 3100, click the Restart button. When the System LED turns on again,
•
you can re-login to the RemoteAdmin Web browser. For LED information, see "CP 3100
LEDs" on page 83. For login information, see "Logging into RemoteAdmin" on
page 54.
To shut down the CP 3100, click the Shutdown button and wait approximately two
•
minutes before turning off power.
Figure 43. Restart Shutdown Page
Restarting or Shutting Down the CP 3100
82