Installing A Rack-Mount Cp 3100 - Certance CP3100 D2D2T User Manual

Quick Start Installation

Installing a Rack-Mount CP 3100

Use the following procedure to get a rack-mount CP 3100 up and running. Print this page and check
each step as you complete it. If you need more information about a step, turn to the section refer-
enced in the step.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Unpack the contents of your package, and check for damaged items.
See "Unpacking and Inspection" on page 23.
Obtain the additional items you need to install the CP 3100.
See "Items You Must Supply" on page 40.
Be sure the CP 3100's SCSI ID is not being used by another device on the SCSI chain.
See "Reviewing the SCSI ID" on page 40.
Install the CP 3100 in a suitable rack.
See "Installing the Rack-Mount CP 3100 in a Rack" on page 41
Connect the CP 3100 to a host computer.
See "Connecting to a Host" on page 41.
If you have the CP3100R1-320, connect it to an approved DDS-4 or DAT 72 tape drive.
See "Connecting to a Tape Drive" on page 42.
Terminate the SCSI chain appropriately for your configuration.
See "Terminating the SCSI Chain" on page 42.
Connect the CP 3100 to your LAN.
See "Connecting to the Network" on page 42.
Power-up the CP 3100.
See "Powering-up the Rack-Mount CP 3100" on page 43.
If your operating system or backup software does not recognize the CP 3100, you may
need to install drivers.
See "Installing the Driver" on page 43.
Register the CP 3100.
See "Registering the CP 3100" on page 43.
Perform the initial CP 3100 setup procedures:
• Log into RemoteAdmin.
See "Logging into RemoteAdmin" on page 44.
• Set the CP 3100 clock to the current date and time.
See "Setting the CP 3100's Internal Clock" on page 46.
• Set a RemoteAdmin password.
See "Specifying a Password" on page 47.
• Specify the CP 3100 network settings.
See "Configuring Network Settings" on page 48.
• Configure the CP 3100 email settings.
See "Configuring Email Settings" on page 50.
Install your backup software application.
Verify your installation.
See "Verifying Your Installation" on page 53.
Installing a Rack-Mount CP 3100
22