Initial Setup
Figure 25. Email Settings Page
2.
Enter the information described in the Email Settings page (see Table 6 on page 51).
Click Update. A message confirms that the email configuration has been updated.
3.
4.
Record the email settings in Chapter 10.
NOTE: The Email Settings page has a Reset button you can click to cancel your changes.
Table 6. Email Settings Page
Value
SMTP Server IP
SMTP Port
Sender's Email Address
Description
IP address of the SMTP (mail) server (up to four octets from 0 to 255,
separated by periods). Example: 192.168.31.7
Decimal number of the SMTP server port. Default is: 25.
Email address that appears in the "Sent" line of the email sent by
RemoteAdmin. This is how you can identify the particular CP 3100 unit
that sent the message.
Setting the Initial Configuration
51