Quick Start Installation
9.
10.
11.
12.
13.
If your operating system or backup software does not recognize the CP 3100, you may
need to install drivers. See "Installing the Driver" on page 31.
Register the CP 3100.
See "Registering the CP 3100" on page 35.
Perform the initial CP 3100 setup procedures:
• Log into RemoteAdmin.
See "Logging into RemoteAdmin" on page 44.
• Set the CP 3100 clock to the current date and time.
See "Setting the CP 3100's Internal Clock" on page 46.
• Set a RemoteAdmin password.
See "Specifying a Password" on page 47.
• Specify the CP 3100 network settings.
See "Configuring Network Settings" on page 48.
• Configure the CP 3100 email settings.
See "Configuring Email Settings" on page 50.
Install your backup software application.
Verify your installation.
See "Verifying Your Installation" on page 53.
Installing an Internal CP 3100
20