Appendix - M&C PMA Series Instruction Manual

24

APPENDIX


Safety manual according to SIL

Circuit diagram main board PMA 30

Assembly diagram main board PMA 30

Jumper-Settings, test points, plugs for main-, front- and extension board

Circuit diagram front board PMA 30

Assembly diagram front board PMA 30

Assembly diagram bus board PMA 30

Circuit diagram extension board PMA 30

Assembly diagram extension board PMA 30

Connections for wall mounting housing

PMA 30 in wall mounting housing

SIL-declaration of conformity
Further product documentation can be seen and downloaded from our home page:
www.mc-techgroup.com
Safety handbook according to SIL
The indicated product corresponds to the following European and/or international standards about the func-
tional security:
DIN EN 61508 parts 1 – 7 (2011) [corresponds to IEC 61508 : 2010]
Contemplated devices
It was contemplated the PMA 30 with part no.
the following options:
Options
Extra charge for PMA 30 as solvent resistant execution with measuring cell type PMC-1LB. Material: O-rings out of
03A9165
Kalrez®.
Extra charge for PMA 20/30 in chlorine resistant execution with a special measuring cell type PMC-1CL2. All
02A9005
gas bearing tubes PTFE/PVDF equipped with purge gas connectors.
Wall mounting housing out of aluminium type 30-19 with 19"-insertion system (3U/42TE), incl. clamp box,
03A9150
clamp boards and filter, with window. protection class: IP65.
01A9165 Extra charge for changed measuring range to 2.5/5/10/25/100 vol% O
(only for PMA30/D).
01A9165 Additional price for PMA measuring range change in 2.5/5/10/25/100 vol% for recorder output. (for PMA30/D
only)
Measuring cell PMC-1G with glass solder
90A0006
90A0007 Measuring cell PMC-1G/T glass solder, Tantalum
Measuring cell PMC-1, special cell without 104
90A0014
Excluded are the options:
www.mc-techgroup.com
03A2001 / 03A2001a
03A2005 / 03A2005a
PMA30 | 1.01.03
(PMA30A/D),
(PMA30D),
, for recorder outlet and digitalmeter
2
37