Analog Signal Output - M&C PMA Series Instruction Manual

1 = Gas IN 1/8" NPTi
2 = Option purge gas connection 4/6
3 = Gas OUT 1/8" NPTi
4 = D-Sub-connector 9-pole for signal outlet
Figure 6
13.3.1

ANALOG SIGNAL OUTPUT

The PMA 30 has two analog signal outputs as standard. A current signal optionally 0 or 4-20 mA and a voltage
signal 0-10 V, both indicate up to 10 % above the corresponding measuring range.
These analog signals contain initially no status signals.
By series connection of status contact and 4-20mA outlet failure information can
be integrated.
N O T E !
18
Back side PMA 30
PMA30 | 1.01.03
5/6 = Mains fuses (L and N)
7 = Mains IN / connector plug
8 = D-Sub-connector 25-pole for remote control
and indication
www.mc-techgroup.com