Receipt Of Goods And Storage - M&C PMA Series Instruction Manual

The measuring cell 3 must absolutely be protected against dust particles. Therefore, the preceding external
gas conditioning system should be equipped with a fine filter 1 of at least 2 micron filter porosity (eg. type
FP-2T).
The maximum gas flow of 60 Nl/h is adjusted via flow meter 2 with needle valve on the front plate.
A flow sensor 4 in the outlet of the measuring cell is controlling the gas flow through the cell according to
the measuring principle of thermal conductivity. In case the minimum gas flow is decreased, an alarm is au-
tomatically given and is available as status message on the the collective status output. Furthermore, an
alarm state is shown by a colour change of the LED 8 (see figure 2) on the front plate of the analyzer
(red/green).
12

RECEIPT OF GOODS AND STORAGE

The analyzer PMA 30 is a completely pre-installed unit.
 Please take the analyzer and possible special accessories carefully out of the packaging material immedi-
ately after arrival, and compare the goods with the items listed on the packing list;
 Check the goods for any damage caused during delivery and, if necessary, notify your transport insurance
company without delay of any damage discovered.
N O T E !
www.mc-techgroup.com
The oxygen analyzer PMA 30 must be stored in a weather-protected and
frost-proof area!
PMA30 | 1.01.03 15