Record Data; Record Measurement Data; Reading Out Blackbox Data - Julabo 9021713.S1.02 Original Operating Manual

Operation
8.5

8.5.1 Record measurement data

8.5.2 Reading out blackbox data

60
Find Quality Products Online at:

Record data

Measurement data for an ongoing temperature control application can also be
recorded onto a USB stick at the same time. The record documents the date,
time, setpoint temperature, intern actual value, external actual value and the
percentage power. The data is saved as a .txt file and can be subsequently
analyzed.
 The device is switched on.
 A USB stick is available.
1. Bring up the <Main menu>.
2. Bring up the <Record data> submenu.
 The warning appears: "Please insert a USB stick!".
3. Insert the USB stick into the USB socket on the back of the device.
4. Bring up the <Start measurement data recording on USB stick>
submenu.
5. Set the sampling interval from 1 to 60 seconds and confirm your setting.
6. Press the [Start] softkey.
7. If necessary, change the file name.
8. Confirm with the [OK] softkey.
 The measurement data recording is started. The data is recorded at the
specified interval until you press the [Stop recording] softkey.
The blackbox stores all relevant data from the last 30 minutes. In addition, the
black box logs alarms and warnings.
The blackbox can be read out and the data sent to technical service for analysis.
 The device is switched on.
 A USB stick is available.
1. Bring up the <Main menu>.
2. Bring up the <Record data> submenu.
 The warning appears: "Please insert a USB stick!".
3. Insert the USB stick into the USB socket on the back of the device.
4. Bring up the <Save blackbox on USB stick> submenu.
5. If necessary, change the displayed file name.
6. Confirm with the [OK] softkey.
 The blackbox data is saved onto the USB stick as a .txt file.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com