Table of Contents
Advertisement
Find Quality Products Online at:
8.8.4 Set profile timer
Temperature control sequences can be individually programmed for individual
temperature control profiles in the <Profile timer> submenu.
The device is switched on.
1. Bring up the <Main menu>.
2. From the <Programmer> submenu, select the menu option <Profile
timer>.
The dialog box for setting the profile timer appears on the display.
3. Select the <Profile> field.
The display changes to the <Edit profile> submenu.
4. Select a profile.
5. Press the [Back] softkey to return to the <Profile timer> submenu.
The selected temperature control profile is displayed in the dialog window.
6. Set the start time and the start date and confirm each entry.
7. In the <Profile runs> field, set how often the selected temperature control
profile should be repeated.
8. In the <Final state> field, select how the device should behave after the
temperature control sequence expires.
9. Enable the <Active> field to activate the profile timer.
The profile timer is programmed and active.
8.8.5 Profile series setup
The sequence of a profile series is set up in the <Profile series> submenu.
This defines the start time, the number of runs, the frequency, and the behavior
of the device at the end of the profile series.
The device is switched on.
1. Bring up the <Main menu>.
2. From the <Programmer> submenu, select the menu option <Profile
series>.
The dialog box for setting the profile series appears on the display.
3. Select the <Profile> field.
The display changes to the <Edit profile> submenu.
4. Select a profile.
5. Press the [Back] softkey to switch back to the <Profile series> submenu.
The selected temperature control profile is displayed in the dialog window.
6. Set the start time and date, as well as the series end and number of runs.
Always confirm your entry.
7. In the <Weekdays> field, select the days on which the profile series
should run.
GlobalTestSupply
www.
Operation
71
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
