Table of Contents
Advertisement
Find Quality Products Online at:
8
Operation
8.1
Switch on the unit
This section describes how to switch on the device.
The unit is connected and ready for operation.
1. Switch the unit on at the mains switch.
The software boots and starts the unit. The display shows the unit name,
voltage version and software version.
The unit is switched on. It switches to the most recently activated operating
mode, manual mode of operation or remote control mode. If the auto start
function is activated, then the unit starts directly into the last setting.
If remote control mode is enabled, operation at the device is not possible.
First, deactivate the remote control mode.
8.2
Switch off the unit
This section describes how to switch off the device.
The device is switched on.
1. Stop a running temperature control application.
If a cooling machine is connected, the cooling symbol flashes and the
cooling machine is shut down.
Do not switch off the device until the cooling symbol stops flashing and the
device is in standby mode.
2. Switch the device off at the mains switch.
The device is switched off.
8.3
Start temperature control application
A temperature application can be started directly on the unit. Other options
include timer-controlled temperature control application with the integrated
programmer and remote control via a connected PC.
The unit is switched on.
1. Activate the <Setpoint> field on the Home screen with the central
controller.
2. Enter the desired setpoint and confirm your input.
GlobalTestSupply
www.
Operation
57
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
