Page 1
Pos: 2 /T echnische Do kum entation/Flash CORIO/Einhäng ethermostat CORIO C/Titelfoto C @ 0 \mod_1 424 680 789 375 _0.docx @ 793 0 @ @ 1 === Ende d er L iste für Textm arke Inhalt1 === Immersion / Open Bath Circulators Operating Instructions Important: keep original operating manual for future use.
Table of contents 1 Intended use ..................5 2 CORIO C product overview ............... 6 ® 3 Description ................... 6 4 Explanation of safety information ............. 7 Explanation of other information ............7 5 Safety instructions ................8 6 Operator's responsibility - safety instructions ......... 9 Requirements for the operating personnel ..........
Page 3
15.1 For external connection ................. 26 15.2 For open baths ..................26 16 Maintenance, repair and transport ..........26 16.1 Cleaning ....................26 16.2 Repair service ..................27 17 Warranty .................... 28 18 Waste disposal .................. 29 18.1 Packaging....................29 18.2 Unit .......................
Page 4
Congratulations. You have made an excellent choice. JULABO thanks you for the trust you have placed in us. This operating manual is designed to familiarize you with the operation of our units and their possible applications. Please read the operating manual carefully.
Intended use Intended use JULABO circulators are designed for controlling the temperature of water in a bath tank. JULABO circulators are not designed for the direct temperature control of foods, semi-luxury foods and tobacco, or pharmaceutical and medical products. •...
CORIO C product overview ® Immersion circulator Open bath circulator for bath tanks up to 30 l. with high quality bath tanks made of transparent plastic or stainless steel. Pos: 8 /T echnische Do kum entation/Flash CORIO/Einhäng ethermostat CORIO C/B eschreibung Thermostat C @ 0 \mod_13 963 355 173 76_ 18.docx @ 441 1 @ 1 @ 1 Description •...
Explanation of safety information Explanation of safety information The operating manual contains warnings to increase safety when using the unit. The general warning sign, consisting of an equilateral triangle surrounding an exclamation sign and reproduced in various signal colors, is preceded by the signal words. "Warning of a dangerous situation".
Safety instructions It is important to follow these safety instructions to prevent personal injury and property damage. These instructions apply in addition to standard safety practices for working places. • It is essential that you read the user information before starting the unit.
Operator's responsibility - safety instructions Operator's responsibility - safety instructions Products manufactured by JULABO GmbH ensure safe operation when installed, operated and according to common safety regulations. This section explains the potential dangers which may occur when operating the unit and specifies the most important safety measures to prevent these dangers as far as possible.
Preparations for operating the device Installation Danger of electric shock. Carefully secure the immersion circulator on the bath tank. Poorly installed circulators can fall into the bath tank. Have the unit checked by a service technician prior to re-use. The heater must not be in contact with the wall or the bottom of the bath tank.
Pos: 18 /T echnische Dokum entation/Flash CORIO/CORIO_CD_ GESAM T/Of fen e Badg ef äße (bxhxt) @ 0 \mod_1 424 251 016 879 _18.doc x @ 78 60 @ 2 @ 1 Open bath tanks Open JULABO baths can be combined with JULABO circulators from the CORIO product series. When combined with these circulators they are designed for controlling the temperature of liquid media recommended by JULABO.
Page 14
Technical details for transparent bath tanks Type BT19 BT27 Order numbers 9901305 9901309 9901319 9901327 +20 ... +100 Temperature range °C Approx. weight 23 x 38 x 38 32 x 38 x 38 38 x 58 x 38 38 x 58 x 43 Dimensions (WxDxH*) 15 x 15 x 15 23 x 15 x 15...
Page 15
Preparations for operating the device Type Order numbers 9903427 9903433 9903439 Temperature range °C +20 ... +150 Approx. weight 17.6 14.6 Dimensions (WxDxH*) 38x58x47 91x36x43 54x34x57 Useful bath opening (WxLxD) 30x35x20 66x32x15 33x30x30 Filling volume, Min...Max 19.5 … 22.0 26.0 … 30.0 35.0 …41.0 Material Parts in contact with the bath fluid: Stainless steel...
Bath fluid This circulator is only approved for use with water as the bath fluid. Recommended water mixture. 70 % soft/decalcified water and 30% tap water. The parts of the bath which come into contact with the bath fluid may be damaged and cause the failure of the device.
Page 17
Filling Properties of indirectly temperature-controlled fluids and substances The intended use of the units includes the indirectly temperature control of fluids. We do not know which substances these are. Many substances are: • inflammable, flammable or explosive • harmful • polluting In other words: dangerous The user bears sole responsibility for handling these substances.
We disclaim all liability for damage caused by incorrect line voltages! Pos: 24 /T echnische Dokum entation/Flash CORIO/Warnung heiß e Oberfläche @ 0\mod_ 138 968 608 832 0_18 .docx @ 36 68 @ @ 1 What should be observed when operating the JULABO temperature control unit? •...
Initial Operation Start • Press OK for approx. 4 seconds. 28. 3 The current bath temperature will be shown on LED temperature display. Stop • Press OK for approx. 4 seconds. • Switch off the unit with the circulator's mains power switch. Pos: 26 /T echnische Dokum entation/Flash CORIO/Autostart ein / aus @ 0\mod_13 952 386 395 40_1 8.docx @ 4 216 @ 2 @ 1 10.2 Automatic / Manual start mode The AUTOSTART function allows the device to be started as soon as the...
10.3 Adjusting of temperature setpoint Factory setting: 10°C The temperature can be set in the start/stop condition. The set value is saved so that it will be retained even after a power outage. Press the edit key briefly to switch from displaying the actual value to the desired value.
Page 21
Initial Operation 48. 9 Read the bath temperature value on the calibrated thermometer and round it up or down and set it. (Example: 48.87°C to 48.9°C) Press the key to confirm. The circulator will confirm the process by displaying "CAL". If the value is outside a window of ±5 °C, its entry will be ignored! Error message: Err = Error - Err...
11 Error messages / Possible causes of faults The following faults which trigger alarms result in the unit's heater and circulating pump being shut down permanently. The alarm indicator lights up and a continuous signal tone will sound. The reason for the alarm will be shown on the LED temperature display in coded form.
If necessary the unit should be inspected by a JULABO service technician. Pos: 30 /T echnische Dokum entation/Flash CORIO/Entleeren @ 0\mod_13 896 860 404 62_ 18.docx @ 366 2 @ 1 @ 1...
13 Technical data 13.1 Circulator Circulator CORIO 20 ... 100. Working temperature range °C ±0.03 Temperature stability °C Digital Temperature setting Temperature display Resolution °C 1-point ATC - Absolute Temperature Calibration PID1 Temperature control Heating capacity (at 230 V) Heating capacity (at 115 V) Heating capacity (at 100 V) Circulating pump...
Materials of parts in contact with the bath fluid Safety precautions to IEC 61010-2-010: 103.5 ±2 °C Excess temperature protection, fixed value Classification to DIN 12876-1 Class I Alarm Optical and audible (permanent) Ambient conditions to IEC 61010-1: For indoor use only. Altitude up to 200 m - normal zero.
15 Accessories 15.1 For external connection • Bath fluids • Tubing • Shut-off valve • Barbed fittings • Adapters 15.2 For open baths Temperature applications for samples, preparation of samples for serology and clinical chemistry, analysis, etc. • Test tube racks •...
Maintenance, repair and transport 16.2 Repair service Before asking for a service technician or returning a JULABO unit for repair, please contact our Technical Service Department. If you return a unit to JULABO: • Clean the unit to avoid any harm to the service personnel.
JULABO GmbH’s original invoice. JULABO GmbH reserves the right to decide the validity of any warranty claim. In case of faults arising either due to faulty materials or workmanship, parts will be repaired or replaced free of charge, or a new replacement unit will be supplied.
Waste disposal 18 Waste disposal 18.1 Packaging Packaging materials must be disposed of as prescribed by the current local regulations. 18.2 Unit In the European Economic Area (EEA) the disposal of waste equipment is regulated in the "Directive of the European Parliament and of the Council on Waste Electrical and Electronic Equipment (WEEE)".
Need help?
Do you have a question about the 9011305.22 and is the answer not in the manual?
Questions and answers