Switching On/Off - Dog trace d-control 500 mini User Manual

Switching ON/OFF

SWITCHING THE TRASNMITTER ON/OFF
Switching on: Press down for 1 second the button

The LCD display indicates that the unit is active.
Switching off: Again, press down for 1 second the button

SWITCHING THE RECEIVER ON/OFF
A magnet located at the lower part of the transmitter is used to activate or deactivate the magnetic
switch located in the receiver.
Switching on: approach the low area of the transmitter where the magnet is located until coming

close to the indicator located on the receiver (see the picture), hold for 1 second, the receiver
LED indicator will flash in green indicating the receiver is ON.
Switching off: approach the low area of the transmitter where the magnet is located until coming

close to the indicator located on the receiver, hold for 1 second, the receiver LED indicator will flash
from green to red indicating the receiver is OFF.

To extend the battery life it is necessary to switch off both receiver
and transmitter after the training is finished. If the battery will not
be in use for a month or longer, it is recommended that it is
removed from the receiver.
Switching ON/OFF the transmitter/Programming the transmitter with the receive
8
on the transmitter.
on the transmitter.