Receiver; Transmitter Preparation; Inserting (Changing) The Transmitter Battery; Checking The Transmitter Battery's Status - Dog trace d-control 300 User Manual

Aqua spray

Table of Contents

Receiver

1. Strap (collar)

2. Battery compartment lid

3. Indicator light

4. Spray nozzle

5. Red target – Marks the place for a magnet to turn on the receiver

6. Fill/Refill port

1. On the back side, remove the screws of the battery

compartment cover with a Phillips-Head screwdriver.

2. Insert the lithium CR2 3 V battery with the correct

polarity (polarity is marked in the battery com-

partment).

3. Replace the cover and screws, making the screws

reasonably tight.

To check battery status, see the LCD indicator:

– fully charged battery

– medium charged battery

– flat battery

If the battery is flat, insert new lithium battery CR2 3V into the battery compartment.

Switching on: hold down the

Switching off: hold down the

button for one second. The display will turn on.

button for one second. The display will turn off.

Table of Contents

D-control 900