Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro GrandStand Multi Force 72524 Operator's Manual

Mower with 52in or 60in turbo force cutting unit and low flow hydraulics
Hide thumbs Also See for GrandStand Multi Force 72524:
Table of Contents

Advertisement

Specifications

Note:
Specifications and design are subject to
change without notice.
52in Mower Deck
Cutting width
131 cm (52 inches)
Width with
173 cm (68 inches)
deflector down
Width with
137 cm (54 inches)
deflector raised
Length with
191 cm (75 inches)
platform down
Length with
155 cm (61 inches)
platform up
Height
122 cm (48 inches)
Weight
405 kg (893 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
60in Mower Deck
152 cm (60 inches)
193 cm (76 inches)
157 cm (62 inches)
201 cm (79 inches)
165 cm (65 inches)
122 cm (48 inches)
420 kg (926 lb)
for a list of all
11
Operation

Before Operation

Before Operation Safety

General Safety
Never allow children or untrained people to operate
the machine. Local regulations may restrict the
age of the operator. The owner is responsible for
training all operators and mechanics.
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operator's position. Allow the machine to cool
before servicing, adjusting, fueling, cleaning, or
storing it.
Know how to stop the machine and shut off the
engine quickly.
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories
required to operate the machine properly and
safely.
Fuel Safety
Fuel is extremely flammable and highly explosive.
A fire or explosion from fuel can burn you and
others and can damage property.
– To prevent a static charge from igniting the fuel,
place the container and/or machine directly on
the ground before filling, not in a vehicle or on
an object.
– Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel that
spills.
– Do not handle fuel when smoking or around an
open flame or sparks.
– Do not remove the fuel cap or add fuel to the
tank while the engine is running or hot.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand multi force 72530414932857414800000

Table of Contents