Safety; General Safety; Safety And Instructional Decals - Toro GrandStand Multi Force 72524 Operator's Manual

Safety

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep clear of the discharge opening.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Battery Symbols
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
Manufacturer's Mark
1. This mark indicates that the blade is identified as a part
from the original machine manufacturer.
decalbatterysymbols
6. Keep bystanders away
from the battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard
decaloemmarkt
•
Keep bystanders and children out of the operating
area. Do not allow children to operate the machine.
Allow only people who are responsible, trained,
familiar with the instructions, and physically
capable to operate the machine.
•
Stop the machine, shut off the engine, and remove
the ignition key before servicing, fueling, or
unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
1. Hot surface/burn hazard—wear protective gloves when
handling the hydraulic couplers and read the Operator's
Manual for information on handling hydraulic components.
1. Warning—do not touch the hot surface.
4
, which
115-4855
106-5517
decal115-4855
decal106-5517